This is a super simple pillow case pattern (No printer needed!). It consists of three pieces, 1 for the front of the pillow and 2 for the back. Cut your fabric in the following dimensions:

Front piece: 29 x 21.5 inches

2 Back pieces: 18 x 21.5 inches

Next you take the 21.5 inch raw edge of back panels and fold the edge over twice at 1/4inch to create a 1/4 inch hem. Sew just 1 hem per panel.

Next you will lay the front fabric pretty side up and then lay the back fabric pretty side down (keep hemmed sides in the middle). Keep corners lined up and the middle hems should overlap, which is what creates the envelope style pillow case.

Pin it together and sew around the perimeter with a 1/4 inch seam allowance.

Flip right side out and you’re finished!✅